A tek screw is also called self-drilling screws or self-tapping fasteners. At the end of its tip, a carving is found there known as a drill. It is used to create a small hole on a surface before the whole screw gets driven into the very surface. Most of them are designed for metal to metal applications, but there’s one made specifically for wood to metal known as ReanerTek screw. In this write-up, we look at the basics of a tek screw.
The Basics of a Tek Screw
1. How are Tek Screws Used?
The screws have many capabilities and are used in any wok that would benefit from them. They are used in construction to join two metals such as steel, aluminium, copper, or to join wood and metal. They are very common in the electrical industry and work with steel studs and thin metal applications. You drill it into the material while being guided by the drill points, depending on the material’s thickness. The drill points range from 1-5. An electric screwdriver or a drill is necessary to drive the screws in.
2. What are the Benefits of Tek Screws?
a. Saves Time
You don’t need to pre-drill a hole to use it. Some screws require you to create a pilot hole that will guide you in driving it, which may take more time. With tek screws, you place it directly on the spot you prefer then a hole is created by the drill bit. This saves a lot of time and reduces the steps needed to complete some projects.
b. Durability
The crews remain in good condition even in extreme weather. You can use them on many projects, and they still look perfect. This extends their life span and serves you for a long time.
c. Non-Corrosive
The material used to make the screws does not rust. The most common material used is stainless steel, and it’s not affected by any environmental condition.
d. No Mess Made
Since there’s no pilot hole drilling, no shavings are produced; therefore, it is easy to clean up afterward. Creating the hole first produces dust and dirt, which adds to the work that has to be done.
3. What Type of Tek Screws are Available?
There are many tek screw options available for purchase. They come in various types and sizes. The tip’s size identifies the screws, and its length depends on the thickness of the material being drilled. The head style category includes screws such as flathead, wafer head, hex washer head, pan head, trim head, and many more.
4. What to Consider Before Buying the Tek Screw
It would help if you considered the following.
- The head style
- The thickness of the screw required, i.e., 6,8, 10, 12, 14
- The length of the screw depending on the thickness of the material
- How does the tip of the screw look like? Its purpose
- The material of the screw; zinc plated, stainless steel, copper
- The number of screws needed
Conclusion
Tek screws come in handy in various applications and have significant advantages. They are easy to use and require minimal effort and time. You can check out more on screws and know which other types are available.
